Step by Step Instructions for Proctor Requirements in the course:

1. After finishing all the modules, the page will ask you to enter the Proctor’s email address for him/her to receive an access code.

2. Next page will ask you to enter the access code to enable your Final Exam. (Please note at this point the Proctor is sitting with you and he/she enters the access code on your course screen)

3. Start your exam while the Proctor is sitting beside you

4. Once you finish and pass your final exam, you will be asked to give your feedback through a rating & survey system

5. The next page will be “Sign the Affidavit”. Read the instructions and then click the Complete and Sign Affidavit button

6. The next page is just to inform you that the Proctor needs to sign the affidavit and that you understand the requirements. Check the box and click “Start”.

7. The next page is almost similar and just makes sure the Proctor is sitting with you and that he/she will fill out the Proctor form. Click “Continue”

8. A separate DocuSign tab will open. On the top it will read “Please Review & Act on These Documents”. The form is then filled out by the Proctor and it can be submitted.

9. Your Course and Proctor requirements are complete. You need to allow us 24 to 48 business hours to verify your completion details along with the Proctor form in order to get your Certificate.




As per §19.1017. Adjuster Prelicensing Education Course Content and Examination Requirements.



(e) A disinterested third party shall monitor the final examination in a visual environment. During the examination, students may not use course materials, personal notes, or any other written or electronic material or media that is not part of the examination, nor engage in communication of any kind with any other person except to receive instructions from the examination monitor. Upon completion of the examination, the person monitoring the examination must mail or deliver the completed examination directly to the provider.








HOMERECIPROCITYALL LINESProctoringHARVEYABOUT USENROLLFAQsContact Us

Texas 
Insurance 
Adjuster 
Training 
Online
Step by Step Instructions for Proctor Requirements in the course:

1. After finishing all the modules, the page will ask you to enter the Proctor’s email address for him/her to receive an access code.

2. Next page will ask you to enter the access code to enable your Final Exam. (Please note at this point the Proctor is sitting with you and he/she enters the access code on your course screen)

3. Start your exam while the Proctor is sitting beside you

4. Once you finish and pass your final exam, you will be asked to give your feedback through a rating & survey system

5. The next page will be “Sign the Affidavit”. Read the instructions and then click the Complete and Sign Affidavit button

6. The next page is just to inform you that the Proctor needs to sign the affidavit and that you understand the requirements. Check the box and click “Start”.

7. The next page is almost similar and just makes sure the Proctor is sitting with you and that he/she will fill out the Proctor form. Click “Continue”

8. A separate DocuSign tab will open. On the top it will read “Please Review & Act on These Documents”. The form is then filled out by the Proctor and it can be submitted.

9. Your Course and Proctor requirements are complete. You need to allow us 24 to 48 business hours to verify your completion details along with the Proctor form in order to get your Certificate.


As per §19.1017. Adjuster Prelicensing Education Course Content and Examination Requirements.


(e) A disinterested third party shall monitor the final examination in a visual environment. During the examination, students may not use course materials, personal notes, or any other written or electronic material or media that is not part of the examination, nor engage in communication of any kind with any other person except to receive instructions from the examination monitor. Upon completion of the examination, the person monitoring the examination must mail or deliver the completed examination directly to the provider.


http://www.tdi.texas.gov/dtSearch/dtisapi6.dll?cmd=getdoc&DocId=2367627&Index=D%3a%5ccatalogs%5cwww%5cstaging%5cindex%5call&HitCount=6&hits=3668+3669+366a+38b6+38b7+38b8+&SearchForm=%2fsearch%2ftdisearchform%2ehtml


 (1) All lines adjuster. The student shall complete a 150-question examination in less than 180 minutes over the subjects and in the question percentages as set forth in §19.1018(a) of this title (relating to Adjuster Prelicensing Examination Topics).

(2) Property, casualty, and surety adjuster. The student shall complete a 150-question examination in less than 180 minutes over the subjects and in the question percentages as set forth in §19.1018(b) of this title.

(3) Workers' compensation adjuster. The student shall complete a 60-question examination in less than 90 minutes over the subjects and in the question percentages as set forth in §19.1018(c) of this title.

(4) At least 70% of the examination questions must be based on the application level or higher. The remainder of questions may be based at the knowledge level. Examination questions shall not be the same or substantially the same questions the student previously encountered in the course materials or review examinations and cannot be designed such that the correct answer is obvious by its content. The examination questions shall be multiple choice questions stemming from an inquiry with at least four appropriate potential responses and for which "all of the above" or "none of the above" is not an appropriate option.

(5) The specific examination questions may not be made available to the student until the test is administered. Security measures shall be in place to maintain the integrity of the examination and ensure that the enrolled student is the individual who took the examination.

(6) Providers must include and maintain the examination results in the student's record for four years. Providers and instructors shall not give any person answers to the examination questions at any time before, during, or after the course.

(7) An authorized staff member or a computer program shall grade the examinations.

(c) Students shall be allowed to retake a certified prelicensing examination course at least one time if a score of 70% or higher is not achieved without being required to retake the course. The retest shall consist of an alternate examination consisting of different questions from the original examination.

(d) Final examinations shall consist of at least three complete exams which are distributed alternatively to students and are revised or updated consistent with the course update/revision. The provider may distribute only one examination to any student at any one examination.

(e) A disinterested third party shall monitor the final examination in a visual environment. During the examination, students may not use course materials, personal notes, or any other written or electronic material or media that is not part of the examination, nor engage in communication of any kind with any other person except to receive instructions from the examination monitor. Upon completion of the examination, the person monitoring the examination must mail or deliver the completed examination directly to the provider.

(f) Providers shall issue certificates of completion to students who successfully pass the examination by correctly answering at least 70% of the examination questions correctly. The provider must issue the certificate in a manner which shall ensure that the student receiving the certificate is the student who took the course, issue the certificate within 30 days of passing the examination, and complete the certificate to reflect the dates the student took the course and examination. Providers shall not allow a student, or any person or organization other than the provider giving the course, to prepare, print, or complete a certificate of completion.